Manufacturer of thrust washer
Custom manufacturer of machinery thrust washer made from stainless steel washer , bronze thrust washer materials. Suitable for shims, spacers, washers and wear plates applications. Serves the agriculture, electronics, medical, military, railroad, machinery, mass transit, construction, automotive, marine, food and service industries. Thrust washers are specialized flat bearings that support axial loads on rotating shafts. They are designed to accommodate specific axial forces and minimize stress concentrations while providing a low-friction, wear-resistant surface. The design of a thrust washer involves several key considerations:
Advanced Coatings and Composites, Request Thrust Washer Information
Make direct information requests and inquiries to this Verified Thrust Bearing Supplier. We have developed new and unique self-lubricating composite materials called self-lubricating bearings. These materials use graphite fibers combined with a resin and our proprietary lubricative pigments.
Bushing & Thrust Washer Suppliers
Manufacturer standard bushing and custom of thrust washer plate for use with oil lubrication. Plates are anti-friction and wear or fatigue resistant. Serves the agriculture, automotive, construction, energy, fluid power, oil and gas, primary metal, railway and recreational industries. Meets standards. REACH and RoHS compliant.
Thrust Bearings Supplier
Standard Plain Thrust Bearing Washer
We offers a diverse family of thin walled, low friction, multi-layered bearings. Styles are available in straight bore, flanged washers, plates and made-to-order types. We have several engineered solution thrust bearing types each having a unique operational operational characteristics and each designed to perform lubrication free. If you’re looking for different specifications for your thrust bearings, thrust washer and metal washers, We can help you develop custom thrust bearings. Custom plain bearings often differ in materials, dimensions and tolerances. Together with you, we always seek out a solution for providing you with suitable, custom thrust bearings.
Plain Steel Thrust Washers
100% Oilless Self-Lubricating Thrust Washers
Product Quality Index
Energy Generation
Manufacturer specializing in producing
specialty-non standard thrust washers.
Supplier of roller and plain sleeve bearing thrust washers.
Made from stainless steel, steel, and metal bronze materials. Specifications in metric and inch size in different thicknesses. Serves the automotive, chemical, food, beverage, pulp, paper, lumber, wood, cement, iron, steel, rubber, plastic, oil, and gas extraction industries. Our range of plain thrust bearings, flanged bushes, strips, and thrust washers with and without a flange. In addition to our broad range, we can nearly always supply plain bearings made from other materials in other dimensions, tolerances, and designs. Design Variants: Thrust washers can have different designs, such as flat or conical shapes, and may include features like grooves for lubrication distribution. The surface finish should be smooth to reduce friction and wear.
Thrust Washer Online – Thrust Washers, Strips, Fast Turnaround Times
Our goal is to achieve profitable cooperation, combining your frame conditions with our knowledge of plain bearings and thrust washer to come up with the best solution, rather than issuing one-sided specifications.
Washers and thrust bars are used not only for rotary and oscillating motion, but also for linear motion with short or long strokes.
Self-lubricating, thrust bearing washer, Plain bearings. The complete range
Manufacturer of thrust washers for your market. Various other products available include thrust bearings. Made in China. A thrust washer bearing is a particular type of rotary bearing. Like other bushing bearings they permanently rotate between parts, but they are designed to support a predominantly axial load. Thrust bearings come in several varieties. thrust washer sizes made to order, Find your thrust washer sizes. Custom manufacturer of non-metallic washers including graphite bronze oilless washer and steel backed thrust washers. Capabilities include engineering, component and part assembly, lathe turning, sawing, routing, drilling, CNC machining.
Huge Washer Selection
Manufacturer & supplier of washers including thrust washers & threaded inserts washers. PTFE bearings flanged bearings and thrust washers are ideal for applications with high loads and moderate speeds.
Thrust Washer Material Data and Technical Information
Tolerance and Fit Considerations The thrust washer must be designed to fit snugly within the assembly, avoiding both excessive looseness and undue friction. It’s essential to define precise tolerances to guarantee the washer’s proper fit and functionality.
PV Value Calculation Importance In thrust washer design, the PV value, derived from multiplying pressure (P) and velocity (V), is crucial. It assists in determining the washer’s operational boundaries regarding load and speed, ensuring it functions within safe limits.
Advanced Design Techniques For more complex applications, advanced design methods might include utilizing simulation tools, studying the dynamics of equalized tilting pad thrust bearings, and fine-tuning aspects like pivot type, pad spacing, and thickness. These adjustments are vital for enhancing performance in specific load-speed scenarios.
Significance of Lubrication Adequate lubrication is vital for thrust washer operation. The design should incorporate features that maintain consistent lubrication, particularly in high-speed settings where the risk of oil carbonization is significant.
Maintenance and Versatility Attributes The use of self-lubricating thrust washers is beneficial in minimizing maintenance, especially in hard-to-reach places. Their versatility allows them to be employed in a variety of applications, enhancing their utility.
Overall Design Summary Designing a thrust washer is a multifaceted process that demands thorough analysis of operating conditions, material characteristics, load capacity, and maintenance needs. Engaging an engineer in the design process is often advantageous to ensure all aspects are meticulously addressed and the design is tailored to the specific requirements of the intended application.
When designing a thrust washer for valve applications, several factors need to be considered to ensure optimal performance and reliability. Here are some key aspects to focus on:
- Material Selection: Choose a material that can withstand the specific operating conditions of the valve system. Metallic bronze is often a suitable choice for thrust washer applications due to its excellent wear resistance and load-carrying capacity. Other materials, such as PTFE or POM composites, can also be considered for their self-lubricating properties and low friction coefficients.
- Load Capacity: Determine the expected axial load that the thrust washer will need to support. This will help in selecting the appropriate material thickness and bearing design to ensure it can handle the required load without excessive deformation or wear.
- Lubrication: Consider whether the thrust washer will require supplemental lubrication or if it needs to be self-lubricating. Metallic bronze thrust washers typically need lubrication, while PTFE or POM composites are often self-lubricating due to their inherent low friction properties.
- Bearing Design: Pay attention to the design of the thrust washer, ensuring that it provides optimal contact area and load distribution. The washer should have a suitable geometry, such as a flat or conical shape, to accommodate the specific axial forces and minimize stress concentrations.
- Surface Finish: Ensure that the surface finish of the thrust washer is appropriate for the intended application. The surface should be smooth to reduce friction and wear, promoting smooth operation and longevity.
- Tolerance and Fit: Consider the tolerance requirements and the fit of the thrust washer within the valve assembly. It should fit securely without excessive play or interference, allowing for proper axial movement and load transfer.
- Environmental Considerations: Evaluate the operating environment of the valve system, including temperature, humidity, and exposure to chemicals or corrosive substances. Choose a thrust washer material that can withstand these conditions and provide adequate resistance to corrosion and wear.
- Testing and Validation: Once the thrust washer design is finalized, it is essential to conduct thorough testing and validation to ensure it meets the performance requirements. This can include testing for load capacity, friction coefficients, wear resistance, and durability.
By considering these factors during the design process, you can create a thrust washer specifically tailored to the valve application, providing reliable and efficient performance.
Thrust Washer Material Data and Technical Information
Thrust washers are essential components in various applications, providing a low-friction, wear-resistant surface to support axial loads. They are commonly used in automotive, aerospace, and industrial equipment.
Various materials can be used for thrust washers, each with its unique properties and advantages. Below is a table comparing different thrust washer materials and their technical information:
| Material | Composition | Density (g/cm³) | Tensile Strength
(MPa) |
Hardness
(HB) |
Coefficient
of Friction |
Thermal Conductivity
(W/m·K) |
Corrosion
Resistance |
Applications |
|---|---|---|---|---|---|---|---|---|
| Steel | Fe: 98-99%, C: 0.1-2%, other elements | 7.8-8.0 | 300-2000 | 100-500 | 0.10-0.20 (lubricated) | 25-70 | Low | Automotive, machinery, general engineering |
| Bronze (C93200) | Cu: 81-85%, Sn: 6.3-7.5%, Pb: 6-8%, Zn: 2-4% | 8.8-9.0 | 221-310 | 65-90 | 0.05-0.10 (lubricated) | 60-70 | Good | Automotive, machinery, heavy-duty equipment |
| Bronze (RG7) | Cu: 60-65%, Sn: 5-7%,
Pb: 5-7%, Zn: 20-25%, Mn: 0.5-2% |
8.5-8.8 | 280-350 | 70-130 | 0.05-0.10 (lubricated) | 50-60 | Good | Bearings, bushings, gears, heavy-duty machinery |
| PTFE (Polytetrafluoroethylene) | 100% Polytetrafluoroethylene | 2.1-2.3 | 10-35 | N/A | 0.04-0.10 (dry) | 0.25 | Excellent | Automotive, aerospace, chemical industry |
| Nylon | 100% Polyamide | 1.1-1.4 | 40-80 | N/A | 0.15-0.35 (dry) | 0.25 | Good | Automotive, machinery, consumer products |
| PEEK (Polyetheretherketone) | 100% PEEK | 1.3-1.4 | 90-110 | N/A | 0.20-0.30 (dry) | 0.25 | Excellent | Aerospace, automotive, medical, electronics |
This table provides a comprehensive comparison of different thrust washer materials and their technical information. It is essential to consider the specific requirements of each application when choosing a material, as each material has unique advantages and drawbacks.
Factors such as wear resistance, friction, thermal conductivity, and corrosion resistance should be considered to ensure optimal performance and service life.
Steel PTFE Thrust Washers and Oilless Graphite Washers
Features and Technical Information of DU Thrust Washers and Oilless Graphite Washers
DU Thrust Washers and Oilless Graphite Washers are both self-lubricating, maintenance-free solutions for various applications. They are designed to provide low-friction and long-lasting performance in demanding conditions. Below is a table comparing the features and technical information of these two types of thrust washers:
| Feature/Property | DU Thrust Washer | Oilless Graphite Washer |
|---|---|---|
| Material Composition | Steel backing, porous bronze layer, PTFE sliding surface | Steel or bronze backing, solid lubricant (graphite) plugs |
| Structure | Three-layer composite structure | Two-layer structure with embedded lubricant plugs |
| Lubrication | Self-lubricating (PTFE sliding surface) | Self-lubricating (graphite plugs) |
| Density (g/cm³) | 3.5-4.5 (composite) | 6.0-9.0 (depending on backing material) |
| Tensile Strength (MPa) | 140 (PTFE sliding layer) | Varies (depending on backing material) |
| Hardness (HB) | N/A | 100-500 (depending on backing material) |
| Coefficient of Friction | 0.03-0.20 (dry), 0.02-0.10 (lubricated) | 0.04-0.20 (dry), 0.02-0.10 (lubricated) |
| Temperature Range (°C) | -200 to 280 | -200 to 400 |
| Thermal Conductivity (W/m·K) | 2.0 (PTFE sliding layer) | 25-70 (depending on backing material) |
| Corrosion Resistance | Good (depending on application and environmental conditions) | Good (depending on application and environmental conditions) |
| Wear Resistance | High | High |
| Load Capacity (MPa) | Up to 250 (depending on application) | Up to 150 (depending on application) |
| Speed Limit (m/s) | 2.5 (rotating), 5.0 (oscillating), 15 (linear) | Varies (depending on application) |
| Applications | Automotive, aerospace, heavy machinery, general engineering | Automotive, heavy machinery, industrial equipment, general engineering |
The table above compares the features and technical information of DU Thrust Washers and Oilless Graphite Washers. Both types of washers offer self-lubricating capabilities and wear resistance, making them ideal for various applications. When selecting a thrust washer, consider factors such as load capacity, speed limit, temperature range, and specific application requirements to ensure optimal performance and service life.
Features and Technical Information of DX POM Thrust Washers and Oil-free Washers
| Feature/Property | DX POM Thrust Washer | Oil-free Washer |
|---|---|---|
| Material Composition | Steel backing, porous bronze layer, POM sliding surface | Steel or bronze backing, solid lubricant (e.g., PTFE) plugs |
| Structure | Three-layer composite structure | Two-layer structure with embedded lubricant plugs |
| Lubrication | Self-lubricating (POM sliding surface) | Self-lubricating (solid lubricant plugs) |
| Density (g/cm³) | 3.5-4.5 (composite) | 6.0-9.0 (depending on backing material) |
| Tensile Strength (MPa) | 80 (POM sliding layer) | Varies (depending on backing material) |
| Hardness (HB) | N/A | 100-500 (depending on backing material) |
| Coefficient of Friction | 0.04-0.20 (dry), 0.02-0.10 (lubricated) | 0.04-0.20 (dry), 0.02-0.10 (lubricated) |
| Temperature Range (°C) | -40 to 130 | -200 to 400 (depending on solid lubricant used) |
| Thermal Conductivity (W/m·K) | 4.0 (POM sliding layer) | 25-70 (depending on backing material) |
| Corrosion Resistance | Good (depending on application and environmental conditions) | Good (depending on application and environmental conditions) |
| Wear Resistance | High | High |
| Load Capacity (MPa) | Up to 140 (depending on application) | Up to 150 (depending on application) |
| Speed Limit (m/s) | 2.5 (rotating), 5.0 (oscillating), 15 (linear) | Varies (depending on application) |
| Applications | Automotive, heavy machinery, general engineering, industrial equipment | Automotive, heavy machinery, industrial equipment, general engineering |
The table above compares the features and technical information of DX POM Thrust Washers and Oil-free Washers. Both types of washers offer self-lubricating capabilities and wear resistance, making them suitable for various applications. When selecting a thrust washer, consider factors such as load capacity, speed limit, temperature range, and specific application requirements to ensure optimal performance and service life.
Prototyping & Low-Volume Production Of Thrust Washer, Low Cost, On Time, To Spec
Our range of products
Our slide bearings at a glance.
Thrust Washer
sleeve Bushing
Flange Bushing
We manufacture thrust washers tailored to your individual needs.
Manufacturing of thrust washers, tin-plated steel PTFE washer
A tin-plated steel PTFE washer is a type of washer used in various industrial applications to create a seal between two surfaces.
The washer is made of two materials – steel and PTFE (polytetrafluoroethylene). Steel provides the washer with strength and durability, while PTFE is a high-performance fluoropolymer with excellent chemical and heat resistance properties.
The washer is coated with a thin layer of tin, which provides additional protection against corrosion and oxidation. This makes it suitable for use in harsh environments, where exposure to moisture and other corrosive agents can cause rusting and other forms of degradation.
Tin-plated steel PTFE washers are commonly used in industries such as automotive, aerospace, and chemical processing, where they are used to seal various components and prevent leaks. They are also used in household appliances such as faucets, where they help to create a tight seal and prevent leaks.
Manufacturing of thrust washers, thrust bearings, washer and sliding plate. Low to medium volume. Fast delivery. Small tooling charges.
A steel tin-plated sintered bronze PTFE washer is a type of washer that is designed to provide a tight seal between two components in a wide range of applications.
The washer is composed of three main components: steel, sintered bronze, and PTFE. The steel provides the washer with strength and durability, while the sintered bronze provides additional structural support and improves the washer’s ability to withstand high temperatures and pressures. The PTFE layer provides excellent chemical resistance and low-friction properties.
The washer is coated with a layer of tin plating, which protects the steel from corrosion and provides a smooth surface that helps the washer slide easily over the mating surface.
The sintered bronze layer in the washer is a porous material that allows for the flow of lubricants and other fluids, which helps to reduce friction and wear on the mating surfaces. The PTFE layer provides an additional layer of protection against chemical attack and helps to reduce friction and wear on the surfaces.
Dimension range: With flat strip bearing surface up to 155 mm in diameter. With lubrication grooves up to 110 mm in diameter. In standard thicknesses of 1.0 / 1.5 / 2.0 / 2.5 and 3.0 mm. Other thrust bearing & washers sizes on request! Our bronze wrapped washers have been developed for slow speed, high load applications, especially suited for oscillating motion and are perfect for the construction, mining/quarrying, agriculture and automotive industries. Thrust washers are fabricated in different materials such as metals, , PTFE, fiber and self-lubricated materials. Capabilities include rapid prototyping, die cutting, cutting, lathe cutting, laser cutting, remanufacturing. Design and engineering assistance services, asset recovery services, manufacturing services and on-site product customized services are available.
Custom manufacturer of thrust washers. Manufacturer of bearings including thrust washer, plain bearings, bronze oilless washer, plating, engineering and CAD designing services are available for thrust bearings. Made in China.
A DU thrust bearing washer is a type of washer used in mechanical applications to support axial loads and reduce friction between two surfaces.
The DU thrust bearing washer is made from a composite material consisting of a thin steel backing, a porous bronze intermediate layer, and a polytetrafluoroethylene (PTFE) surface layer. This layered construction gives the washer high load-carrying capacity and low-friction properties.
The steel backing provides the washer with strength and rigidity, while the porous bronze layer allows for the flow of lubricants to help reduce friction between the washer and the mating surface. The PTFE surface layer provides excellent wear resistance and low friction, making it suitable for high-speed and high-temperature applications.
DU thrust bearing washers are commonly used in applications where axial loads need to be supported, such as in gearboxes, pumps, and motors. They can also be used in conjunction with other bearings to provide additional support and reduce friction. Their low friction properties help to reduce wear and increase the lifespan of the mating surfaces, while their high load-carrying capacity helps to distribute the load evenly across the washer, preventing localized wear and damage.
Bringing movement into play: slide bearings from china. Serving numerous applications, they can be found in technically sophisticated combustion engines as piston and connecting rod bushings or rocker arm pins. Plain slide bushing bearings are also used in bearings for modern axle and brake systems, transmissions, differentials and hydraulic pumps, as well as in oscillating elements such as booms or gripper systems on construction and agricultural machinery.
Custom manufacturer of metallic washers such as bimetal thrust washers
The slide bearings & thrust washer products are manufactured in various versions according to your wishes. Together with you, we work specifically on new and further developments of our products. We attach great importance to modern and economical production. Thrust washers from strip & Thrust washers from bronze. Manufacturing of thrust washers. Milling, drilling, boring, tapping, forming, threading, cutting, knurling, flanging, rolling, sawing and welding services are also offered.
The available bushing, thrust washer and strip types, the slide bearings designs, characteristics and main application. Washers and thrust strips are used not only for rotary and oscillating motion but also for linear motion with short or long stroke lengths.
Maintenance-free thrust washers are used to support forces in the axial direction. Straps are used to facilitate linear movement. Strips are also used as a base material for individual special projects produced according to drawings. With maintenance-free polymer composite plain bearings with cusn8 slide bearings plain material, lubrication is not required at any point in the service life due to the use of PTFE as a dry lubricant. The maintenance-free PTFE polymer composite plain slide bushing bearings are pre-lubricated at the start of operation. As the sliding layer has lubrication pockets, pre-lubrication is sufficient in most cases. Value delivered through quality service.
Thrust Washer Strips Machining – You Design It, We’ll Make It
Bronze Slide Bearing Materials, The Materials You Need
Bushing Bearing Selection
Thrust washers plain bearing, Looking for Custom Materials?
Reliable CNC Machining Service
Steel Backed Thrust Washer BushingsMachining Quote – Prototyping Services
Custom Manufacturing, Factory DirectPrecision Thrust Bearing
Precision Thrust Bearing Washer, Get quality machined parts in as fast delivery!
Choose your correct thrust washer plain bearing for your agricultural machinery. CAD File Quotes, CNC Milling, Turning & Cutting. Maintenance free! Longer life! Custom manufacturer of thrust washers, PTFE coated washers made from stainless steel, steel, carbon steel, brass, bronze plugged graphite thrust bearing.
Thrust Bearing Services
Machining Service From
$1.00 – Custom Plain Bearing Parts
Trusted handyman services
Online CNC Machining Services for Custom Parts And Production Parts. China CNC Machining Prototype, Custom Parts & Rapid Prototyping. Order Status Tracking. Online Quote.Manufacturer of standard and custom thrust washers. Available different thicknesses. Made of PTFE. Provides a low friction face to shaft collars and can be used in rotary applications. Features include temperature and corrosion resistant. REACH and RoHS compliant
Self-lubricating Bronze Bearings Supplier
Thrust Washer Design Parts Manufacturers – OEM/ODM available
As a common component in mechanical systems, thrust washers are widely used in reciprocating rotary motion occasions in valves, automobiles, ships and other fields. Its main function is to locate and avoid direct contact between components, reduce component movement and wear, and improve system stability. Wear and tear is the main reason for the failure of thrust washers, which not only causes the function of the washers to decline or lose, but also has a serious impact on the mechanical system.
Plain bearings are a reliable, cost-efficient solution
Thrust Washer Bearing
