Self-lubricating PEEK bushings are a type of bearing component that are designed to operate without the need for external lubrication. PEEK, or polyetheretherketone, is a thermoplastic polymer that offers a number of advantages as a bearing material, including high strength, chemical resistance, and low wear.

Self-lubricating PEEK bushings use a combination of the material’s inherent properties and a special internal lubricant to reduce friction and wear during operation. The lubricant is either molded into the bushing during the manufacturing process or applied to the surface of the bushing.

The use of self-lubricating PEEK bushings can offer a number of benefits, including reduced maintenance and replacement costs, improved reliability, and increased efficiency. These bushings are also suitable for use in harsh environments, including high temperatures, corrosive atmospheres, and high-load applications.

There are many manufacturers of self-lubricating PEEK bushings, both large multinational corporations and smaller specialty manufacturers. The choice of manufacturer will depend on a variety of factors, including the specific requirements of your application, the desired level of quality, and the budget for the project.

When choosing a manufacturer of self-lubricating PEEK bushings, it is important to consider factors such as the company’s experience and expertise in the field, their production capabilities, their quality control processes, and their customer service and support. You should also consider factors such as delivery time, cost, and availability of technical support and resources.

In conclusion, self-lubricating PEEK bushings offer a high-performing and low-maintenance solution for a variety of applications. By carefully evaluating the specific requirements of your application and considering factors such as experience, quality, and cost, you can find the right manufacturer to meet your needs and ensure the success of your project.

PEEK composite sliding bearing, PEEK composite sliding bearing, aims to provide a high temperature resistant, low friction coefficient, good mechanical properties of the PEEK composite sliding bearing. Its cylindrical sleeve direction with an opening or a round tube connected with a hitch, cylindrical is based on steel, the inner circle of the base material is sintered with a copper powder layer, the characteristics of the inner circle of the copper powder layer is attached to the sintered PEEK material. The utility model than the existing slide bearing with PTFE, superior performance, more widely used, can meet the design requirements of different structures.

Self-lubricating bearings: smaller, lighter, safer. With a long history of quality assurance. Composite bearings are widely used in various industries, providing customized bearing solutions for the industry.

Modified PEEK with self-lubricating additives for applications where chemicals may be used. Excellent wear resistance in both wet or dry applications. Available in bronze base material for use as bushings in chemical pumps or valves. Extra thick bushings allow for minor modification of shaft misalignment. PTFE pads with special fillers are used in shock absorbers, hydraulic motors, automotive lift and and pivot devices, and linear motion equipment. A common use is in bicycle/motorcycle shock absorbers as wear resistant bearings for pistons and rods. It has excellent wear performance in the absence of lubrication.

Steel backed bronze PEEK bushings are a type of bearing component that combines the strengths of two materials to offer improved performance in high-load and high-stress applications. The steel backing provides strength and stability, while the bronze and PEEK composite offers reduced friction and wear.

Bronze is a widely used bearing material that offers good wear resistance and is well-suited to high-load applications. PEEK, or polyetheretherketone, is a thermoplastic polymer that offers high strength, chemical resistance, and low wear. The combination of these materials in a steel-backed bushing provides improved performance over traditional bronze bushings.

Steel backed bronze PEEK bushings are designed to offer long service life and low maintenance in demanding applications, including high-temperature and corrosive environments. These bushings are also designed to offer reduced friction and improved efficiency, reducing the risk of failure and extending the lifespan of the component.

There are many manufacturers of steel backed bronze PEEK bushings, both large multinational corporations and smaller specialty manufacturers. The choice of manufacturer will depend on a variety of factors, including the specific requirements of your application, the desired level of quality, and the budget for the project.

When choosing a manufacturer of steel backed bronze PEEK bushings, it is important to consider factors such as the company’s experience and expertise in the field, their production capabilities, their quality control processes, and their customer service and support. You should also consider factors such as delivery time, cost, and availability of technical support and resources.

In conclusion, steel backed bronze PEEK bushings offer a high-performing and low-maintenance solution for a variety of applications. By carefully evaluating the specific requirements of your application and considering factors such as experience, quality, and cost, you can find the right manufacturer to meet your needs and ensure the success of your project.

We have been approached by a company that was looking for sliding bearings. If you have self-lubricating bushings projects or special requirements, do not hesitate to contact us. We will find a solution for you! PEEK bushing bearing forms made to order: Cylindrical bushings, flanged bearings, thrust washers, sliding plates, half- bearings, customized bearing designs. Polymer plain bearing – metal / self-lubricating bushing design, Steel + Porous Bronze Sinter + PEEK + PTFE + Fillers, low-maintenance, machinable! Available today to offer technical advice for specific solutions and applications. Experts in developing materials for specific applications. Composite Bushing Material, PEEK + Solid Lubricant , Self-lubricating+ Fillers!

Sliding bearings Bushings utilize special polymer liners to achieve self-lubrication and improved wear performance. The steel backing material provides structural and mechanical support for the adhesive layer and the bearing surface. Steel backings can be galvanized or copper plated, or stainless steel can be used for maximum corrosion resistance. Metal backing supports liner materials manufactured to withstand high loads, high speeds and adverse environments. Has a very low coefficient of friction when running dry. Bearings are available in inch and metric sizes with a variety of combinations of liner and backing materials. Thin metal walls allow for easier design without loss of performance. All liner types are capable of withstanding extreme load conditions and speeds, even without lubrication. The supporting interlayer is a self-lubricating Bushings material even if the liner wears. Which type of liner is selected depends on the application. Each liner type has unique properties (and benefits).

1: – corrosion resistance, anti-aging 2: resistance to solubility; 3: high temperature, high frequency and high voltage electrical performance conditions 4: both toughness and rigidity; 5 size requirements for precision conditions 6: irradiation resistance wear resistance, corrosion resistance conditions 7: hydrolysis resistance, high temperature and high pressure can still maintain excellent characteristics; 8: lightweight instead of metal for fiber optic components 9: wear resistance, anti-static electrical insulation performance; 10: mechanical strength requirements of high parts 11: low soot and toxic gas emission.

Materials Polyetheretherketone (PEEK)resin is a special engineering plastic with excellent performance and has many significant advantages over other special engineering plastics.

High temperature resistance, excellent mechanical properties, good self-lubrication, chemical corrosion resistance, flame retardant, peel resistance, irradiation resistance, stable insulation

Hydrolysis resistance and easy processing, etc., in aerospace, automotive manufacturing, electrical and electronic, medical and food processing and other fields of application.

PEEK resin was first used in the aerospace industry, replacing aluminum and other metal materials in the manufacture of various aircraft parts. The automotive industry uses PEEK resin for its good friction resistance and mechanical properties as a raw material for the manufacture of engine covers, bearings, gaskets, seals, clutch rings, and other parts in the transmission, brake, and air conditioning systems of automobiles. PEEK resins are ideal electrical insulators and maintain good electrical insulation properties under harsh operating conditions such as high temperature, high pressure and high humidity, so the electronics and information field is becoming the second largest application area for PEEK resins, manufacturing pipes, valves and pumps that carry ultrapure water, and are commonly used in the semiconductor industry to manufacture wafer carriers, electronic insulation diaphragms, and various connected devices. As a semi-crystalline engineering plastic, PEEK is insoluble in almost all solvents except concentrated sulfuric acid, and is therefore commonly used to make compressor valves, piston rings, seals, and various chemical pump bodies and valve components. PEEK molding temperature 320 degrees ~ 390 degrees baking temperature 160 ~ 1855H ~ 8H mold temperature 140 ~ 180 this material molding temperature is too high, the damage to the screw is more serious, in setting the screw speed can not be too fast, injection pressure in 100 ~ 130MPa injection speed 40 ~ 80. molding should be completed in a timely manner with PE wax fast cleaning screw, can not let PEEK material stays in the screw.