C95510 Nickel Aluminum Bronze Bushings & Bearings
About us
Manufacturing C95510 Nickel Aluminum Bronze Bearing, AMS 4880-C95510
The specialization in cast bronze machined parts indicates a focus on precision manufacturing and the ability to produce parts with tight tolerances and high-quality surface finishes. The use of continuous cast processes ensures a uniform and fine-grained structure of the bronze, which contributes to the parts’ mechanical strength and resistance to wear.
Type Of Bearing
C95510 nickel-aluminum bronze
Produces C95400, C95500, and C95900 aluminum bronze alloys as standard bearing products.
Bronze Bearing Bushing Plates: These are flat plates that incorporate a bronze bushing. They are used in applications that require a bearing surface to support a load and allow for movement with minimal friction.
C95510 nickel-aluminum bronze, also known as AMS 4880, is widely utilized in industries for producing bearings and bushings. This alloy is preferred for its superior mechanical properties, robust corrosion and erosion resistance, and high strength.
Chemical composition: The alloy’s chemical makeup includes copper (Cu), aluminum (Al), iron (Fe), manganese (Mn), nickel (Ni), tin (Sn), and zinc (Zn), all present in specific weight percentages that define the alloy’s characteristics. For instance, the copper content can be as low as 78.0%, while aluminum can reach up to 10.9%, with varying amounts of other elements.
Mechanical properties: AMS 4880 offers high tensile strength ranging from about 105-125 ksi and yield strength from 95-110 ksi, with elongation that reflects good ductility.
Physical properties: This alloy melts between 1930°F and 1900°F, has a density of 0.272 lb/in³, and a specific gravity of 7.53. It exhibits favorable electrical and thermal conductivity, and its coefficient of thermal expansion is beneficial for machining and molding.
C95510 nickel-aluminum bronze
Applications: Predominantly used in the aerospace industry for components like landing gear bushings and bearings due to its strength and resistance to corrosion. It also finds applications in industrial bearings and marine settings, such as in propeller hubs and wear rings.
Availability: Available in various forms, this material can be found as solid rods ranging from 1/2-inch to 12 inches in diameter, and hollow rods up to 10 inches in outside diameter. Both centrifugal and continuous cast forms are offered, conforming to standards such as ASTM B-505 and AMS 4880.
Standards and specifications: This alloy adheres to numerous industry standards, including AMS 4880, SAE J461, and J462, which affirm its quality and dependability for specific uses.
In summary, C95510 nickel-aluminum bronze (AMS 4880) is a high-strength, corrosion-resistant alloy with exceptional mechanical properties, making it ideal for critical applications such as aerospace landing gear components. It is available in diverse forms and meets rigorous industry standards, ensuring its reliability for manufacturers.
C95510 Nickel Aluminum Bronze
C95510 Nickel Aluminum Bronze is a high-strength alloy known for its excellent mechanical properties, good corrosion resistance, and wear resistance, making it suitable for bearing applications.
C95510 Nickel Aluminum Bronze, as specified in the search results, has a well-defined chemical composition that contributes to its excellent mechanical properties and corrosion resistance.
Solid Bronze Bearing Bushings:
Solid bronze bushings are used in plain bearing applications where they provide a bearing surface for a shaft or within a housing. Made from solid bronze, these bushings offer excellent wear resistance and can operate in wet or dusty environments.
Leaded, Phosphor And Aluminium Bronzes Plates and Bearing，
Wear Plates – Mold and Die Products, Search Our Material Alloy
Here is the chemical composition of C95510 according to the provided information:
- Copper (Cu): Min 78.00%
- Aluminum (Al): Between 9.7% and 10.9%
- Iron (Fe): Between 2.0% and 3.5%
- Manganese (Mn): Between 1.5% and 4.5%
- Nickel (Ni): Between 4.5% and 5.5%
- Lead (Pb): Not specified in the provided information, but typically present in trace amounts
- Silicon (Si): Not specified, but usually not a significant component
- Phosphorus (P): Not specified, but typically present in trace amounts
- Zinc (Zn): Not specified, but this is not a typical component of C95510
When manufacturing cast bronze machined parts, the following factors are typically considered:
- Material Selection: Choosing the right bronze alloy (like C95510) for the specific application is crucial.
- Design: The design must accommodate the shrinkage and thermal expansion characteristics of bronze during the casting process.
- Machining: Precision machining is required to achieve the necessary tolerances and finishes for the final part.
- Heat Treatment: Heat treatment may be used to enhance the mechanical properties of the bronze parts.
- Quality Control: Rigorous inspection and testing ensure that the parts meet the required specifications and performance standards.
By specializing in cast bronze machined parts, a manufacturer can provide customers with reliable and high-performing components tailored to their specific needs.
As a manufacturer specializing in custom machined bushing parts using bronze and other bronze bearing alloys, you would focus on providing tailored solutions for clients with specific engineered application requirements.
C95510 Nickel Aluminum Bronze Bearing， Manufacturer of custom machined parts
Experience the Strength of Self-lubricating Bearings
C95510 Alloys Materials Selection
Cast bronze machined parts are integral components in a variety of industrial applications due to their excellent mechanical properties, corrosion resistance, and self-lubricating characteristics.
Continuous Cast Bronze Bushings:
These are cylindrical sleeves that are used to reduce friction between a rotating shaft and its support. Continuous cast bronze bushings are known for their durability and ability to operate in environments with less lubrication.
Pillow Blocks:
Pillow blocks are support housings that include a bronze bushing and are designed to hold a rotating shaft in place. They are often used in applications such as conveyor systems, pumps, and other machinery where a bearing is required to support the load and maintain alignment.
C95510 (AMS 4880) Nickel Aluminum Bronze finished parts
C95510 (AMS 4880) Nickel Aluminum Bronze is indeed a high-performance alloy that is valued for its mechanical strength and heat treatment capabilities, making it suitable for continuous cast production of items like bearings and bushings.
High Mechanical Strength: C95510 has a high tensile strength and yield strength, which is critical for components that must withstand substantial loads. The alloy’s strength allows it to be used in demanding applications where reliability and durability are paramount.
Continuous Cast: The ability to produce C95510 in a continuous cast process allows for the creation of long lengths of material with a consistent cross-section. This method is more efficient than traditional casting methods and can result in cost savings due to reduced material waste.
Cost Savings: The use of C95510 in cored bar form can lead to significant cost savings due to reduced material usage and scrap. This is particularly important in industries where material costs are a significant portion of the overall production cost.
Continuous cast, Bronze C95510 bearing and Bushing， Bearing Bronze Supplier
Produces AMS 4880-C95510 alloy as a standard-stocked aluminum bronze alloy.
Wide Application: As mentioned, C95510 is used in a variety of applications, including gear, marine components, and industrial bearings, where its combination of strength, corrosion resistance, and wear resistance is highly valued.
The properties of C95510 Nickel Aluminum Bronze make it a popular choice for components that require high strength, durability, and resistance to harsh operating conditions. Its production in a continuous cast and cored bar form further enhances its appeal by offering cost-effective solutions with reduced material waste.
