Custom-tailored solutions – Self-lubricating – Bronze Lube Bearing
Other plain bearings, flange bearings, and thrust washers are less common, but are just as important in specific applications and often have to perform under changing conditions.

Oil-free lubricated bearing application features and advantages

1. Oil-free lubrication or less lubrication, suitable for places where oil cannot be added or is difficult to be added, can be used without maintenance or less maintenance.
2. Good wear resistance, small friction coefficient and long service life.
3. With the right amount of elastic-plastic, the stress can be distributed on a wide contact surface, and the bearing capacity can be improved.
4. The static friction coefficient is similar, can eliminate the creep at low speed, so as to ensure the working accuracy of the machine.
5. Can make machinery reduce vibration, reduce noise, prevent pollution, improve working conditions.
6. Transfer film can be formed in the operation process to protect the grinding shaft, and there is no biting shaft phenomenon.
7. Low hardness is required for the grinding shaft, which can be used without quenching and tempering treatment, thus reducing the processing difficulty of relevant parts.
8. Thin wall structure, light weight, can reduce the volume of machinery.
9. The back of steel can be electroplated with a variety of metals, which can be used in corrosive media;It has been widely used in sliding parts of various machinery, such as printing machines, textile machines, tobacco machinery, micromotors, automobiles, motorcycles, agricultural and forestry machinery, etc.

Boundary lubricated bearing application features and advantages

1. Good bearing capacity and wear resistance.
2. It is suitable for high load and low speed rotary motion, swing motion and frequent opening and closing under load, which is difficult to form hydrodynamic lubrication.
3. Under the condition of boundary lubrication, the bearing can be maintained without refueling for a long time, while the bearing can have a longer service life with refueling in the upper layer.
4. The surface plastic layer can be left with a certain margin during the processing and forming, and can be processed by ourselves after the assembly is pressed into the seat hole to achieve a better assembly size.
5. The products are mainly used in automobile chassis, metallurgical machinery, mining machinery, water conservancy machinery, construction machinery, agricultural machinery, steel rolling equipment, etc.